Mold Design Using Ptc Creo Parametric (pro Engi... Apr 2026

: Create the raw block of material (stock) from which the core and cavity will be split. You can use the Automatic Workpiece tool to generate a block based on the reference part's overall dimensions. Develop Parting Geometry :

: Integrated simulation for plastic flow and mold cooling helps identify potential defects like air traps or weld lines before physical production begins. Mold design Using PTC Creo Parametric (Pro Engi...

: Use these surfaces to define where the mold halves will separate. You can create these by extending the silhouette curves to the edges of the workpiece. : Create the raw block of material (stock)

: Before starting the mold, evaluate the part for manufacturability. : Use these surfaces to define where the

: Automatically detect the outermost profile of the part to help define the parting line.

: Use Analysis > Geometry > Draft Check to ensure all vertical faces have a draft angle—typically 1° to 2° is standard, while textured surfaces may require 3° to 5° .

: The Mold Design Extension (MMX) provides catalogs for standard mold bases and hardware (ejector pins, slides, and lifters).