Menu

Run commit to apply and save the current draft.

To wipe the device, use load factory-default followed by commit . 5. Virtual Chassis Configuration EX 3200 and EX 4200 Switch Quick Start - Juniper Networks

To prevent unwanted image updates during setup, use: delete chassis auto-image-upgrade . 3. Interface and Network Setup

Unlike Cisco, Junos requires an explicit action to save changes.

If an error occurs, rollback 0 reverts to the last committed state.

Use show configuration to see the active settings.

set interfaces ge-0/0/0 unit 0 family inet address [IP/MASK] . Configure VLANs: Define VLAN: set vlans [VLAN-NAME] vlan-id [ID] .

Juniper Ex4200 Configuration | Manual

Run commit to apply and save the current draft.

To wipe the device, use load factory-default followed by commit . 5. Virtual Chassis Configuration EX 3200 and EX 4200 Switch Quick Start - Juniper Networks Juniper Ex4200 Configuration Manual

To prevent unwanted image updates during setup, use: delete chassis auto-image-upgrade . 3. Interface and Network Setup Run commit to apply and save the current draft

Unlike Cisco, Junos requires an explicit action to save changes. Juniper Ex4200 Configuration Manual

If an error occurs, rollback 0 reverts to the last committed state.

Use show configuration to see the active settings.

set interfaces ge-0/0/0 unit 0 family inet address [IP/MASK] . Configure VLANs: Define VLAN: set vlans [VLAN-NAME] vlan-id [ID] .

linkcrossmenucross-circle