Woodworking Plans To Build A Raised Planter - Table

Cut four 4x4 legs. For extra stability, notch the top of the legs so the frame sits directly on the wood rather than just hanging by screws.

2½" exterior-grade pocket hole screws or deck screws. Woodworking Plans To Build A Raised Planter Table

Create a rectangular box using 2x4s. Use wood glue and pocket hole screws on the inside for a clean, fastener-free exterior look. Cut four 4x4 legs

Slats should be spaced about 1/4" apart to allow for water drainage. To prevent sagging from the weight of wet soil, add a 2x4 center support beam under the floor slats. Finish the Walls: Wrap the exterior with your 1x6 boards. Create a rectangular box using 2x4s

Building a raised planter table is a fantastic weekend project that saves your back while adding a professional look to your garden or patio. Cedar and redwood are the gold standards for this build because they are naturally rot-resistant.

Even with rot-resistant wood, applying a food-safe exterior sealer will keep the wood from turning gray over time.

Miter saw, drill/driver, Kreg jig (optional for hidden joints), and a tape measure. 2. Recommended Dimensions