To get the most accurate results, follow these preparation steps: Sit quietly for 5 minutes before starting.
With the device OFF, press and hold the button for 3 seconds.
If you have specific like dizziness or frequent high readings, unit usp 1020d instruktsiia
Before taking your first measurement, ensure the device is configured correctly. 1. Power Supply
Remove batteries if the device will not be used for more than 3 months. To get the most accurate results, follow these
The cuff will automatically inflate. during this time.
Once the measurement is complete, the cuff deflates, and the screen displays: Systolic (top number) DIA: Diastolic (bottom number) PULSE: Heart rate per minute during this time
Sit upright in a chair with your back supported and feet flat on the floor. Cuff Placement: Place the cuff on your bare left arm. Position it about 1–2 cm (0.5 inches) above the elbow. The air tube should run down the center of your inner arm. 🩺 Taking a Measurement Press the START/STOP button.