Tensol 70 Buy -

: Store resin (Part A) at 16–20°C and catalyst (Part B) in the dark at 0–5°C for maximum shelf life. Tensol 70 500ml Adhesive - Plastic Sheets

: Produces joints with strengths up to 35 MPa (cold cured) or 45 MPa (heat treated), nearly equal to the strength of the acrylic itself.

: Primarily for bonding acrylic to itself, but can also bond acrylic to wood and other plastics like Polycarbonate and PETG. Critical Application Guide Using Tensol 70 requires precise mixing and careful timing: tensol 70 buy

: The initial set takes about 20 minutes to 3 hours depending on temperature. Full strength is reached after 24 hours . Safety Precautions

: Accurately add Component B (catalyst) to Component A (resin). Stir thoroughly while avoiding air bubbles, then let stand for 5 minutes to let bubbles rise. : Store resin (Part A) at 16–20°C and

: You must complete the application within 20 minutes of mixing, as the adhesive begins to thicken and weaken after this point.

: Sells the complete pack, including both Part A and Part B. Key Performance Features Critical Application Guide Using Tensol 70 requires precise

: Surfaces must be clean, dry, and free of oil or dust. If bonding extruded acrylic, annealing the sheet beforehand is recommended to prevent stress crazing.