Any nearby (Houses, power lines, or slope)
Look up for "widowmakers" (loose branches that may fall). “Nuts & Bolts” of Tree Felling
Insert felling wedges into the back cut to prevent the tree from sitting back and pinching your saw. Any nearby (Houses, power lines, or slope) Look
The notch determines the direction of the fall. It should go about 1/4 to 1/3 into the trunk. Start at a 60-degree angle downward. Bottom Cut: Cut horizontally to meet the top cut perfectly. The Goal: A clean "mouth" facing your target landing zone. 2. The Back Cut This cut provides the power to push the tree over. It should go about 1/4 to 1/3 into the trunk
Felling is a three-part process designed to create a steering mechanism. 1. The Notch (The Directional Cut)
Clear two paths at 45-degree angles away from the fall line.
Before cutting, evaluate the "natural lean" and potential hazards. Check which way the tree naturally wants to fall.