Mtksecbootdisable-mtk-secure-boot-disable-tool-auth-bypass

You can now flash firmware or perform backups using standard DA files.

Before using the tool, ensure you have the following installed on your PC:

Disconnect and reconnect your powered-off device while holding the required volume buttons. If successful, the log will show . Use SP Flash Tool: Keep the device connected. Launch SP Flash Tool , go to Options > Connection . mtksecbootdisable-mtk-secure-boot-disable-tool-auth-bypass

This often happens if the device is not in the correct BootROM mode. Use the button combinations carefully or check if your chipset is supported.

Set the Connection Type to , select the correct COM Port , and set the Baudrate to 921600 . You can now flash firmware or perform backups

Download the MTK Bypass Utility and the exploit payloads . Step-by-Step Guide

For Windows users, install the libusb-win32 filter driver. Use SP Flash Tool: Keep the device connected

How to use MTK Bypass to backup or flash secure boot MTK - Hovatek