is a miniature, single-door PoE-powered controller designed for edge installation.
: Install the unit in a secure location, such as a junction box or above the door.
: Access the controller's local web page by entering its IP address into a browser to configure basic network settings and security certificates. 3. Managing Images (MPA1.jpg) MPA1.jpg
as detailed in the Honeywell Configuration Guide and WIN-PAK User Guide . Go to product viewer dialog for this item.
The following guide covers the setup and configuration of the MPA1 controller The following guide covers the setup and configuration
: Connect via Power over Ethernet (PoE) or a 12VDC power supply. Wiring : Connect the Wiegand/OSDP reader to the reader port. Connect the door strike/lock to the relay output.
Based on the technical documentation for the Honeywell MPA1 Single Door Edge Controller Go to product viewer dialog for this item. select "Add Image
: To upload, go to the Sites or Maps section of your software, select "Add Image," and upload MPA1.jpg to serve as a visual background where you can drag and drop the controller icon for real-time monitoring. 4. System Integration Cloud Management : For MAXPRO Cloud, register the using its MAC address or QR code found on the device label.