Reports indicated that Tool layers might not appear in rubberband framing, necessitating a workaround where users temporarily switch to Cut layers for alignment.
The headline feature is the introduction of a tab system within the cut settings, allowing users to add multiple sub-layers to a single main layer. This is crucial for complex projects requiring different actions (e.g., cut, 45-degree fill, -45-degree fill) on the same vector without creating multiple color-coded layers. lightburn-1-3-01-full-version
1.3.01 expanded compatibility with ComMarker B4 and other "Dynamic" FPGA-based boards. It also included preliminary support for SPI galvo sources, strengthening LightBurn’s position in the fiber laser market. Reports indicated that Tool layers might not appear
LightBurn 1.3.01 is a mature, robust release that solidified support for fiber lasers and enhanced the efficiency of, complex, multi-pass engraving through its new sub-layer tab system. While it introduced some nuanced issues regarding framing and large file transfers, these were generally solvable through configuration adjustments. If you're using and facing issues, How to properly calibrate the 1.3.01 camera system ? The workarounds for the tool path framing bug? Deep Dive into Lightburn Sub Layers and some added tips! While it introduced some nuanced issues regarding framing
If the laser hangs during long jobs, disabling USB selective suspend in Windows power settings and toggling "Enable DTR Signal" in Device Settings has been the recommended fix.