Courses
To fix this, you need to perform a "dump" or recovery using a computer and a specialized cable. 1. Required Tools
If the device still powers on but shows a "Wrong SW" error on screen, you may be able to fix it via USB: Rename the correct firmware file to . Place it on a FAT32 formatted USB drive.
If you have flashed the wrong software (firmware) onto your Geant GN-RS8 Mini HD Plus Download wrong flash RS8 MiniHD Plus rar
You will need a compatible PC loader tool (often called a "Gx6605s loader") to push the software through the serial port.
Plug the RS232 cable into your PC and the mini-jack into the RS8 receiver while the receiver is powered off . To fix this, you need to perform a
Do not touch the device until it reaches 100% and says "Completed." The receiver will usually reboot automatically. 3. If USB is Still Working
. Reliable sources for these files include SatDL and ReceiverPro . 2. Recovery Steps Place it on a FAT32 formatted USB drive
. The loader should detect the connection and begin the progress bar.