Download Dump Samsat Plus Mini Zip ›

There are two ways to apply the dump, depending on whether your receiver still turns on. Plug the USB drive into the receiver. Go to Menu > Tools (or Settings) > Upgrade by USB . Select All Code or Total Flash as the upgrade mode.

Select your .bin file and press to start. Do not turn off the power until it reboots. Option B: Forced Recovery (If the device is stuck/blocked) Download DUMP Samsat Plus Mini zip

Check the Samsat Soft official support site for the latest software and bin files. There are two ways to apply the dump,

Copy the .bin file directly to the root of the USB drive (not inside any folders). 3. Flash the DUMP onto the Receiver Select All Code or Total Flash as the upgrade mode

Rename your dump file to rom.bin or force_upgrade.bin (check your specific sub-model's manual). Turn off the receiver's power. Insert the USB drive.

Flashing the wrong DUMP file can permanently "brick" your receiver. Always verify that the file size matches the flash memory capacity of your device (typically 4MB or 8MB). AI responses may include mistakes. Learn more

Since firmware is specific to hardware versions, you must ensure the file matches your exact model (e.g., Samsat 1300 Plus Mini