B0098.mp4 (2025)

The passenger-side side-impact airbag may be disabled for safety. 2. Primary Causes

Check the wiring harness under the passenger seat. Ensure the yellow SRS connectors are tightly snapped together and free of corrosion. b0098.mp4

If the PPS module or seat was recently serviced, the system may need to be recalibrated using a professional-grade scan tool. Important: The passenger seat must be completely empty during this process. The passenger-side side-impact airbag may be disabled for

The SRS system uses pyrotechnic devices (airbags). and wait at least 10 minutes before working on any yellow-coded wiring or sensors to prevent accidental deployment. Ensure the yellow SRS connectors are tightly snapped

Often occurs after replacing an SRS control module (SDM) or PPS module without proper VIN-matching or calibration.

If the code specifies a "Satellite Sensor," inspect the sensor located inside the front passenger door panel for moisture or impact damage.

Damaged, corroded, or loose wiring and connectors in the passenger door or under the front passenger seat.