Abyss Dmx Controller For S 1560 Manual Apr 2026

To control specific lights, you must assign a DMX address to each decoder so the controller can communicate with them individually.

: The controller connects to DMX decoders (like a 5-channel or 12-channel digital decoder) using a Cat 5 or Cat 6 Ethernet cable.

: Assigning different start addresses (e.g., 001 for Zone 1, 005 for Zone 2) allows the S-1560 to manage different areas of the boat or pool independently. Operation Modes s1560-dmx-controller - Underwater LED Boat Lights Abyss Dmx Controller For S 1560 Manual

, primarily used for managing underwater marine and boat lighting systems.

The Abyss S-1560 is a touch-sensitive wall-mount DMX controller designed for high-end color-changing installations. While it is often used with marine lighting, its logic follows standard DMX512 protocols, allowing it to control multiple zones of RGB or RGBW lights. To control specific lights, you must assign a

: When using Cat 6, common wiring involves soldering the ground shield to pin 1, the white conductor (data -) to pin 2, and the black conductor (data +) to pin 3. Programming & Addressing

: You can assign zones by entering specific codes on the decoder. For example, setting multiple decoders to "001" synchronizes them all to the same controls. : When using Cat 6, common wiring involves

This blog post provides a comprehensive overview of the Abyss DMX S-1560 controller