is a simple "no-tools-required" task that typically takes less than a minute.
features a two-piece "clamshell" design with a snap closure. Open the weight by releasing the side clip. 125989
: Locate the pull-down hose under your sink. Look for a yellow tape mark on the hose. This mark indicates the optimal position for the weight to ensure the sprayer has enough travel to reach the bottom of the sink while still retracting fully. Open the Weight : The is a simple "no-tools-required" task that typically takes
: Snap the two halves of the weight back together until you hear a click. : Locate the pull-down hose under your sink
: Pull the sprayer wand out from the faucet spout above the sink and let it go to ensure it retracts smoothly without snagging on anything under the sink. Product Specifications
: Place the open weight around the hose, aligning it with the yellow mark.
The is a replacement hose weight designed for Moen pull-down or pull-out kitchen faucets. Its primary purpose is to provide the counterweight (approximately 11 ounces) needed to help the sprayer wand retract smoothly back into the faucet spout after use. Installation Guide Installing the